Shenzhen Chuangxinjia Technology Co.,Ltd

    Shenzhen Chuangxinjia Technology Co.,Ltd

    Tel: 86-755-61192092

    Fax: 86-755-82047657

    Phone: +8615019414673

    Zip Code: 518109


    Address: Level 11-12, Datang Time Building, Meilong Road, Qinghu, Longhua New District, Shenzhen, Guangdong, China

Home > News > Content

Protection Of The Battery Starter

Battery starter Uses: suitable for containing methane mixed gas, with the risk of explosion in the coal mine, in the exchange 50HZ, the voltage is 1140V or 660V, the neutral point is not directly connected to the power supply grid, you can local or remote control three-phase squirrel cage Type asynchronous motor.

Battery starter features: 1. The use of shell open door structure, Battery Jump Starter compared to the old shell switch, the device has a light weight, small size, easy maintenance and transportation advantages.

2. Using the Chinese blue screen Han Xian, with standard RS485 / 232 interface, and the host computer network can be telemetry, remote control, remote, remote control and other four remote functions.

3. Drop-down menu settings, with parameter tuning function, without opening the switch parameters can be modified or set.

4. External water level sensor control pump motor, can be achieved automatically open and stop, open without duty. Water level sensor for my company configuration, the work of power for the nature of security.

5. Battery starter with short circuit, overload, phase failure, three-phase unbalance, leakage lock and other protection. At the same time with current, voltage, fault parameters such as display.

Gas discharge light source is different from the heat radiation source, connected to the general power and can not light, but there is a start process, that is, the process of lighting. Battery Jump Starter Each discharge lamp has a corresponding ignition voltage (also known as the breakdown voltage), only when the voltage across the lamp over the ignition voltage, it is possible to establish a gas discharge, the lights lit. Discharge lamp ignition voltage up to tens of thousands of volts, while others are as low as several hundred volts, are generally greater than the power supply voltage. So a single power supply, Battery Jump Starter the general discharge lamp is impossible to be lit. In the circuit must be provided more than the gas discharge light source voltage voltage of the device, which is the battery starter. According to the theory of gas discharge, the ignition voltage of the gas discharge light source can be reduced under certain conditions. If the cathode is preheated, the surface of the lamp is coated with conductive film or conductive tape, the auxiliary electrode is installed, the lamp is filled with Penning gas, Radioactive material, Battery Jump Starter using high frequency voltage and so on. Therefore, according to different types of gas discharge light source, it gradually formed a variety of different battery starter. The main function of the battery starter is to start the lamp, the lights lit, once the discharge lamp is lit, the battery starter will not work, wait until the next time lighting and then use. So the battery starter should be as simple as possible, light and reliable, and some even after the discharge lamp is lit and removed from the circuit without affecting the normal operation of the discharge lamp.

The battery starter is mainly composed of electric motor, ignition switch, electromagnetic switch, transmission device, through the motor rotation torque through the transmission mechanism to the engine flywheel, driving the engine rotation, so that the engine starts, Battery Jump Starter and then start the system through the transmission one-way clutch Flywheel, thus completing the startup process.

Contact Us
Address: Level 11-12,Datang Time Building,Meilong Road,Qinghu, Longhua New District, Shenzhen, Guangdong, China.
Tel: +86-755-61192092